Dexter 800AG2-125.5 Manuel D'instruction page 187

8. OPERATING INSTRUCTIONS / DRAWINGS
Switch ON/OFF
Switch on: Push the safety interlock forwards meanwhile clenching the paddle
to turn on the machine.Then keep hold it in position for continuous operation.
Switch off: Loosen the paddle and turn off the machine,go loosen the safety
interlock to lock witch at OFF position.
WARNING: Do not cover exhaust vents when the tool is in use. This may cause
damage to the motor and reduce the efficiency of the tool.
Abrasive operation
When equipped with abrasive wheel and guard, for the best work results hold
the grinder at 15~20° to the work piece.
Overload
The motor of your right angle grinding machine may be damaged when
overloaded. This results from excessive working pressure over a prolonged
period. Therefore you should not try to accelerate your working speed by
increasing pressure on your machine. The abrasive disks work more efficiently if
only slight pressure is exerted on the grinding machine, thus avoiding a drop in
the grinding speed.
9. MAINTENANCE / CLEANING /
LUBRICATION / STORAGE
15~20°
186
FR
ES
PT
IT
EL
PL
UA
RO
EN