Dexter 800AG2-125.5 Manuel D'instruction page 177

c) Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools.
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts.
tool is maintained.
Safety Warnings Common for Grinding Operations:
a) This power tool is intended to function as a grinder or cut-off tool.
Read all safety warnings, instructions, illustrations and specifications
provided with this power tool.
below may result in electric shock, fire and/or serious injury.
b) Operations such as sanding, wire brushing, polishing are not
recommended to be performed with this power tool.
which the power tool was not designed may create a hazard and cause
personal injury.
c) Do not use accessories which are not specifically designed and
recommended by the tool manufacturer.
be attached to your power tool, it does not assure safe operation.
Such preventive safety measures
Properly maintained cutting tools
This will ensure that the safety of the power
Failure to follow all instructions listed
Operations for
Just because the accessory can
176
FR
ES
PT
IT
EL
PL
UA
RO
EN