Proper Positioning On Vehicle Seat - Diono Monterey XT 10800 Serie Manuel D'instructions

DISENGAGING UAS INSTALLATION
Follow above instructions in reverse:
1) Depress the cam lock lever while pulling child seat away from the vehicle seat back until
the UAS straps are extended all the way.
2) Disconnect UAS connectors from vehicle anchors.
3) Pull UAS adjuster straps to recess the UAS connectors into the back of the booster
seat bottom for safe storage.

Proper Positioning on Vehicle Seat

Place booster seat on vehicle seat so it is resting firmly on vehicle
seat bottom and touching the vehicle seat back.
IMPORTANT: When using the booster seat as a high-back
booster, try to position backrest in full contact with vehicle seat
back. It may also be necessary to adjust the recline angle of the
booster seat to match that of the vehicle seat.
IMPORTANT: When using booster seat in center seating position,
make sure it is stable and does not rock from side to side.
IMPORTANT: Do not use UAS if installation interferes with vehicle seat belt.
13