Safety; Intended Use; General Safety Information - CASO DESIGN UZ 200 Mode D'emploi

PLEASE NOTE
A notice of this kind indicates additional information, which will simplify the handling of the
machine.

12 Safety

This chapter provides you with important safety notices when handling the device.
The device corresponds with the required safety regulations. Improper use can result in
personal or property damages.

12.1 Intended use

This device is only intended for use in households in enclosed spaces for
 Milling of coffee beans
preparation of pesto
Uses for a different purpose or for a purpose which exceeds this description are
considered incompatible with the intended or designated use.
Do not chop very hard ingredients such as ice.
Warning Danger due to unintended use!
Dangers can emanate from the device if it is used for an unintended use and/or a different
kind of use.
► Use the device exclusively for its intended use.
► Observe the procedural methods described in this Operating Manual.
Claims of all kinds due to damages resulting from unintended uses are excluded.
The User bears the sole risk.

12.2 General Safety information

Please note
Please observe the following general safety notices
with regard to the safe handling of the device.
► Examine the device for any visible external damages
prior to using it. Never put a damaged device into
operation.
► If the power cable is damaged, it must be replaced by the
manufacturer, its service department or a similarly
qualified person, in order to prevent any hazards. Do not
leave the appliance unattended during operation.
 Processing of nuts (shelled), spices & herbs and
25