1- Introduction To The Security System; 2- Indicator Lights - Honeywell Domonial Manuel D'utilisation

1- Introduction to the security system

E
N
The Domonial control panel/communicator unit is the brain of your security system.
It exchanges information with the associated wireless peripherals.
G
The control panel centralises the data sent by the detectors, re c o rds the arming and disarm i n g
L
operations and communicates with the Alarm Receiving Centre.
The control panel also includes a speaker for alarm signalling and audio verification.
I
Your security system may allow up to 3 sets: total set, part set, annex set.
S
It may include :
H
• A KEYPAD WITH DISPLAY for arming and disarming operations and
access to advanced user functions like detector bypass and events log.
• A KEYPAD WITH PROX READER for all users arming and disarming
operations of the different sets.
• A KEYFOB associated to one user for arming and disarming
operations.
• A PIR DETECTO R, is a motion detector, which reacts to the temperature
fluctuations caused by a person in motion.
• A DOOR CONTACT, is a magnetic contact, which two parts are, fitted
one on a door frame and the other on the door itself. When the door or
window is open, the detector is triggered. Before leaving the premises,
always make sure that all openings are properly closed.
• A GLASS BREAK DETECTO R, which analyses the various fre q u e n c i e s
emitted by glass being broken.
• A SMOKE DETECTOR mounted on the ceiling, which ensures the
coverage of about 50 square metres. Refrain from smoking in the vicinity
of this detector.
Radio
• Narrow band frequency modulation
• Identification code for each component
(no interf e rence between neighbouring systems)
• Protection against attempted jamming
• Radio monitoring of the system peripherals
Electrical
• Mains supply with battery backup
• Built-in voltage surge protection
• System supply monitoring
Operational
• Up to 3 protected sets: Total set, Part set, Annex set
• Up to 30 detectors
• Alert functions
• All components protected against tampering
Transmission
• Built-in telephone transmission
• Telephone line loss detection
• Transmission monitoring by periodical tests
• Optional GSM transmitter
- 2 -

2- Indicator lights

The front cover of the control panel features LED indicators which show the status of your security
s y s t e m .
1- LED INDICATOR "AC MAINS POWER"
ON : The Control Panel is supplied from the Mains.
OFF: There is a mains power failure - The control panel is supplied by
its built–in battery.
2- LED INDICATOR "SYSTEM ARMED"
ON : The system total set is armed.
OFF: The system is disarmed.
FLASHING : The system part or annex set is armed.
3- LED INDICATOR "DETECTOR ACTIVATED"
FLASHING : It means that one of the window or door protected by a
magnetic contact is opened. It flashes until the window or door has
been closed.
4- LED INDICATOR "ALARM MEMORY"
ON : It means that an intruder alarm occurred while the system was armed.
FLASHING : It means that an alarm occurred while the part set or annex set
was armed.
The indicator remains ON until the next arming.
5- LED INDICATOR "TECHNICAL FAULT"
ON : It indicates a fault on a technical channel.
FLASHING : It indicates a fault on the system.
(Battery fault, Supervision, Tamper, Phone line failure or Radio jamming)
The indicator remains ON or FLASHING until the condition has been cleared.
- 3 -
E
N
G
L
I
S
H