EKOM DK50 4VR/50 Manuel De L'utilisateur page 29

INSTALLATION
11.3. Valve installation on the condensate drain from the cabinet (DK50 2x4VR/110)
For cabinet-mounted compressors, install the threaded fitting with the valve (1) into the hole in
the side of the cabinet and install the PA Ø 8 / Ø 6 hose (2). Insert the other side of the hose into
the fitting (4) beneath the air tank from which the valve (3) and hose are removed.
Use a Ø16.5 plug to close off the hole on the other side of the cabinet.
The fitting with the valve are standard parts delivered with the cabinet. The condensate drain
valve may be installed on either side of the compressor.
01/2022
Fig. 6: Placement of the compressor in the cabinet
29 NP-DK50 4VR 50, DK50 2x4VR 110-MD-6_01-2022