Storage, Disposal - Tecsis P3308 Instructions De Service

9. Trouble shooting / 10. Storage, disposal
If the problem persists, contact our sales department.
USA, Canada
If the problem continues, contact tecsis or an authorized agent for assistance. If the pressure
sensors must be returned obtain an RMA (return material authorization) number and ship-
ping instructions from the place of purchase. Be sure to include detailed information about
the problem. Pressure transmitters received by tecsis without a valid RMA number will not be
accepted.
Process material certificate (Contamination declaration for returned goods)
Purge / clean dismounted instruments before returning them in order to protect our employees
and the environment from any hazard caused by adherent remaining media.
Service of instruments can only take place safely when a Product Return Form has been
submitted and fully filled-in. This Return Form contains information on all materials with which
the instrument has come into contact, either through installation, test purposes, or cleaning.
You can find the Product Return Form on our internet site (www.tecsis.de/en/services/retoure).

10. Storage, disposal

When storing or disposing of the pressure sensors, take precautions with
!
regard to remaining media in removed pressure transmitters. We recom-
mend cleaning the transmitter properly and carefully. Remaining media in
Warning
the pressure port may be hazardous or toxic!
Disposal
Dispose of instrument components and packaging materials in accordance with the
respective waste treatment and disposal regulations of the region or country to which the
instrument is supplied.
tecsis reserves the right to alter these technical specifications.
24 Betriebsanleitung/Operating instructions/Mode d'emploi/Instrucciones de servicio
GB