ratiotec S 20 Mode D'emploi page 14

Error messages at the start of the machine
A soon as you switch on the machine, self-dia-
gnosis will be carried out. Whenever one of the
following error messages appears, it means that
a sensor is concealed by dust, by dirt or by a
jammed bank note. Switch off the machine and
1
1 Ejection sensor No. 1
2 Ejection sensor No. 2
Error messages on the display
E 00
E 10
E 11
E 30
E 31
E 50
E 80
14
3 Infrared / UV-sensor
2
5 Draw-in sensor
Error point
Infrared/UV sensor
Sensor on the bank-note feeder
Sensor on the bank note ejector
Left counter sensor
Right counter sensor
Rotation speed sensor
Internal memory error
remove the dirt with compressed air spray, soft
cloth/brush or remove the jammed bank note.
Afterwards, start the machine anew. Your machi-
ne should be serviced regularly by a specialist.
3
4
4 Right and left counter sensor
5
Measure to be taken
Remove Top cover, clean the sensor
Clean the sensor on the feeder
Remove the bank notes and
clean the sensor
Remove hosing cover, clean
the sensor
Remove hosing cover, clean
the sensor
Clean the machine, service is
necessary
Get in touch with a service
technician
4