ESAB PT-27 Manuel D'instruction page 84

sEctIoN 5
Switch Kit - p/n 0558005509
(see figure 4-5)
Switch band - p/n 33400
Insulator - p/n 0558000437
(supplied with head)
O-ring - p/n 0558003694
(Supplied with head)
Electrode - p/n 0558000364
Swirl baffle - p/n 0558000365
Nozzle
*50 amp - p/n 0558000363
70 amp - p/n 0558000457
80 amp - p/n 0558000457
Gouging - p/n 0558000480
Shield - p/n 0558000486
*Replacement torches are supplied
with 50 amp nozzles.
Tube Insulator supplied
with torch assembly
Knife connections -
p/n 0558000432
(2 supplied with head)
75° Head - p/n 0558000477
includes:
Insulator - p/n 0558000437
Knife Connect - p/n 0558000432
O-ring - p/n 0558003694
Seat - p/n 0558003032
figure 5-1. pt-27 torch assembly replacement parts
jacket shown rolled back
Cable bundle Assembly
25 ft. (7.6 m) - p/n 0558005677
50 ft. (15.2 m) - p/n 0558006547
Handle - p/n 33399
Gas & Power 5/8 - 18 L.H.
Switch Plug -
p/n 2062336
Figure 4-4 A
Pilot Arc Ring Terminal
(supplied on torch assembly
21661)
PT-27 Torch
Replaceable Seat -
p/n 0558003032
Seat Installation Tool -
p/n 0558003027
The seat is removed and replaced using the ESAb seat
tool.
All torch assemblies and replacement heads are supplied
with the seat installed.
84
rEplacEMENt parts
Flex Support - p/n 21218
boot - p/n
0558000793
Pilot Arc Plug - (see figure 4-4 b)
Strain
Relief - p/n
0558000794
Strain Relief
- p/n 21622