Dynamic Label Plus; Setting Drc; Deleting Inactive Stations; Sorting The Stations - TechniSat DIGITRADIO 585 Mode D'emploi

By pressing the INFO button several times, different information can be
scrolled through, such as station type, multiplex name, frequency, signal error
rate, data bit rate, station format, date.

11.9 Dynamic Label Plus

If supported by the programme provider, the Dynamic Label Plus service also allows,
for example, the name of the current programme or the track and artist to be
displayed.

11.10 Setting DRC

The compression rate balances dynamic vibrations and thereby any volume
variations that occur.
> Press the MENU button and select > [Volume Adjustment] to select the
desired compression rate.
> With the compression rate choose:
DRC high
DRC low
DRC off
> Confirm by pressing OK.

11.11 Deleting inactive stations

> Press the MENU button and use  or  to select > [Delete inactive
stations].
> Confirm by pressing OK.
> Using  or , select > [Yes] and confirm by pressing OK.

11.12 Sorting the stations

> Press the MENU button and then  or to select > [Station order].
> Select a sorting type with  or  and confirm your selection with OK.
You can choose between: Alphanumeric, Provider and Valid.

12 FM mode

12.1 Switching on the radio mode

> Press the MODE button as often as required until [FM Radio] is shown in the
display.
Alternatively:
> Press the MENU button and select [Main Menu > FM]. If you are in a
submenu, select the main menu as described in Section 7.1.
- High compression
- Low compression
- Compression switched off
DE
EN
FR
IT
NL
DA
PL
SK
SL
63