AUDIOropa PROLOOP DCCplus Mode D'emploi page 25

Controls and regulators
Loop current adjustment
Amplification adjustment
Metal loss compensation
Indicators
Power supply
Input level
Induction loop current
Overload
Overheat
Loop error
Induction loop monitor
Dimensions
Colour
Weight
This device satisfies the following EU directives:
- 2011/65/EC RoHS directive
- 2002/96/EC WEEE directive
- 2004/108/EC EMC directive
- 2006/95/EC Low voltage directive
Compliance with the directives listed above is confirmed by the CE seal on the device.
CE compliance declarations are available on the Internet at www.audioropa.com
Technical specifications subject to change without notice.
by control dial
for IN 1 and IN 2 by control dial
by control dial
1 green LED
5 green LED and 1 yellow LED
5 green LED and 1 yellow LED
1 yellow LED
1 red LED
1 red LED
over a 3.5 mm jack for headphone connection
90 x 430 x 270 mm (H x W x D)
Black
7,8 kg
English 25