Master/Slave Mode; Infrared Remote - Chauvet DJ COLORstrip Mini FX Mode D'emploi

Master/Slave
Mode

Infrared Remote

Page 18 of 60
The Master/Slave mode allows a single COLORstrip™ Mini FX product (the "master") to
control the actions of one or more COLORstrip™ Mini FX products (the "slaves") without
the need of a DMX controller. The master will be set to operate in either Automatic or
Sound-Active mode, while the slaves will be set to operate in Slave mode. Once set and
connected, the slave units will operate in unison with the master unit.
Configure the units as indicated below.
Slave units:
1. Press MODE repeatedly until SyS appears on the control panel.
2. Press ENTER and SdAd or SAAd appears on the control panel.
3. Use UP or DOWN to select SAAd.
4. Press ENTER.
5. Connect the DMX input of the first slave unit to the DMX output of the master unit.
6. Connect the DMX input of the subsequent slave units to the DMX output of the
previous slave unit.
7. Finish setting and connecting all the slave units.
Master unit:
1. Set the master unit to operate in either ACt Automatic Operation mode.
2. Make the master unit the first unit in the DMX daisy chain.
·
Configure all the slave units before connecting the master unit to the DMX daisy
chain.
·
Never connect a DMX controller to a DMX string configured for Master/Slave
operation because the controller may interfere with the signals from the master unit.
·
Do not connect more than 31 slave units to the master unit.
The COLORstrip™ Mini FX is fully compatible with the included infrared remote.
To set up a COLORstrip™ Mini FX to operate with the IR remote, do the following:
1. Press MODE repeatedly until rEM shows on the display.
2. Press ENTER.
The following buttons are used with the COLORstrip™ Mini FX.
·
AUTO activates Automatic Operation.
·
MUSIC activates Sound-Active mode.
·
0 to 9 selects the Chase modes.
Press A then PREV or NEXT to select the LED color (0—7).
Press B then PREV or NEXT to select the laser color (0—3).
Press C then PREV or NEXT to select the laser gobo (1—6).
COLORstrip™ Mini FX User Manual