Audio Setting - Denon DVD-1920 Mode D'emploi

DVD SETUP

Audio Setting

You can change some Audio settings. It only affects during
the playback of DVD discs.
1 Press the SETUP button in stop mode.
2 Press the Cursor buttons (s or B) to select CUS-
TOM, then press the ENTER button.
• The CUSTOM mode will appear.
3
Press the Cursor buttons (s or B) to select
AUDIO, then the ENTER button to confirm.
4 Press the Cursor buttons (K or L) to select an
item, then press the ENTER button.
• This menu display contains 2 pages. Press the Cursor
button ( ) repeatedly to show the next page.
L
AUDIO
DRC ON
LPCM SELECT OFF
DOLBY DIGITAL BITSTREAM
DTS BITSTREAM
MPEG PCM
BASS ENHANCER OFF
AUDIO MODE HDMI
DRC (Dynamic Range Control)
(Default: ON)
• DRC function compresses the
range of sound volume.
• DRC function is available only on
the discs that are recorded in the
Dolby Digital format.
LPCM SELECT (Default: OFF)
• Set to ON when outputting in
48kHz (or 44.1kHz).
• This function is available only on
digital outputting of a disc record-
ed in 96kHz (or 88.2kHz).
• Sounds of the DVD-Audio which
exceed 96kHz (or 88.2kHz) will be output as 96kHz (or
88.2kHz) even if LPCM SELECT is set to OFF.
• This function is not effective for the HDMI sound output.
When playing disc with copyright protection
• The sound will be down sampled at 48kHz (44.1kHz),
even if you set to OFF.
DOLBY DIGITAL
(Default: BITSTREAM)
• Set to BITSTREAM when the
player is connected to a Dolby
Digital decoder.
• This function is effective only for
the COAXIAL, OPTICAL and
HDMI connections.
BITSTREAM: Output by Dolby Digital.
• For HDMI connection, if the connected equip-
ment is not compatible with the Dolby Digital
BITSTREAM, the signals are output as PCM
regardless of the setting.
PCM: Convert Dolby Digital to PCM.
DTS
(Default: BITSTREAM)
• Set to BITSTREAM when the unit
is connected to a DTS decoder.
BITSTREAM: Output by DTS sound.
• For HDMI connection, if
the connected equipment is not compatible with
the DTS Bitstream, the signals are output as
PCM regardless of the setting.
PCM: Convert DTS to PCM.
AUDIO
HDMI AUDIO 2 CHANNEL
ANALOG AUDIO 2 CHANNEL
AUDIO
DRC ON
LPCM SELECT OFF
DOLBY DIGITAL BITSTREAM
DTS BITSTREAM
MPEG PCM
BASS ENHANCER OFF
AUDIO MODE HDMI
AUDIO
DRC ON
LPCM SELECT OFF
DOLBY DIGITAL BITSTREAM
DTS BITSTREAM
MPEG PCM
BASS ENHANCER OFF
AUDIO MODE HDMI
QUICK
AUDIO
DRC ON
LPCM SELECT OFF
DOLBY DIGITAL BITSTREAM
DTS BITSTREAM
MPEG PCM
BASS ENHANCER OFF
AUDIO MODE HDMI
QUICK
AUDIO
DRC ON
LPCM SELECT OFF
DOLBY DIGITAL BITSTREAM
DTS BITSTREAM
MPEG PCM
BASS ENHANCER OFF
AUDIO MODE HDMI
MPEG (Default: PCM)
• Set to BITSTREAM when the unit
is connected to an MPEG decoder.
BITSTREAM: Output MPEG sound.
• For HDMI connection, if
the connected equipment
is not compatible with the MPEG sound, the sig-
nals are output as PCM regardless of the setting.
PCM: Convert MPEG sound to PCM.
BASS ENHANCER (Default: OFF)
• Set to ON for sound output on the
bass-woofer channel when 2-chan-
nel audio source is played back.
• This function is effective only for
the 5.1ch AUDIO OUT jacks. Set
the AUDIO MODE to ANALOG
and ANALOG AUDIO to MULTI CHANNEL to set this
function.
• When SUB WOOFER is set to NONE in the Speaker
Configuration, BASS ENHANCER will be set to OFF
automatically.
AUDIO MODE (Default: HDMI)
• Select the sound is output from
whether HDMI OUT jack or 5.1ch
AUDIO OUT jacks.
HDMI: Sound is output via HDMI
connection. Output from
5.1ch AUDIO OUT connec-
tion may be restricted.
ANALOG: Sound is output via 5.1ch AUDIO OUT jacks.
Output from HDMI connection is cut off.
• Set to ANALOG when Super Audio CD is played back.
HDMI AUDIO
(Default: 2 CHANNEL)
• Select the number of channels for
HDMI audio output between 2
CHANNEL and MULTI CHANNEL.
• Refer to the table on page 16 for
the actual output settings.
• Connect appropriate external equipment for each set-
ting and set AUDIO MODE to HDMI beforehand to per-
form this setting.
2 CHANNEL:
2 channel signals are output from HDMI OUT jack.
Suitable for monitors or projectors compatible with
HDMI 2CH.
MULTI CHANNEL:
Multi channel signals are output from HDMI OUT
jack. Suitable for monitors or amplifiers compatible
with HDMI multi channels.
• When MULTI CHANNEL is selected, the Speaker setting
menu for HDMI AUDIO will appear (refer to page 30).
ANALOG AUDIO (Default: 2 CHANNEL)
• Set AUDIO MODE to ANALOG beforehand to perform
this setting.
2 CHANNEL: Output 2ch sound from the 5.1ch AUDIO
OUT jacks.
MULTI CHANNEL: Output Multi channel sound from the
AUDIO
HDMI AUDIO 2 CHANNEL
ANALOG AUDIO 2 CHANNEL
5 Press the SETUP button to exit.
– 29 –
QUICK
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
MPEG
BASS ENHANCER OFF
AUDIO MODE
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
MPEG
BASS ENHANCER OFF
AUDIO MODE
AUDIO
DRC
LPCM SELECT
DOLBY DIGITAL
DTS
MPEG
BASS ENHANCER OFF
AUDIO MODE
AUDIO
HDMI AUDIO
ANALOG AUDIO
5.1ch AUDIO OUT jacks.
AUDIO
ANALOG AUDIO
2 CHANNEL
MULTI CHANNEL
ON
OFF
BITSTREAM
BITSTREAM
PCM
HDMI
ON
OFF
BITSTREAM
BITSTREAM
PCM
HDMI
ON
OFF
BITSTREAM
BITSTREAM
PCM
HDMI
2 CHANNEL
2 CHANNEL
EN