On the next screen, click "Select" if you want to be the Primary User.
13.
The
Primary User will have access to all cleaner functions in the app.
The Primary User can invite or remove people (family members, service
providers etc.) to allow them access to cleaner functions and programming.
Click "Skip" if you do not want to be the Primary User.
NOTE: Send Invite Code - you can only send invite codes if you are set up as the Primary User.
Sending an invite codes to friends and family will allow them to access the cleaner app
functions and programming. If you choose to Skip this step, the Primary User can always
send Invite Codes at a later time by accessing the System Settings Screen.
6
iAquaLink
Once you have downloaded the iAquaLink app and connected the device to
Wi-Fi, the iAquaLink app allows for robotic cleaner control from anywhere,
anytime with access to advanced features, additional programming options and
troubleshooting advice.
WARNING
Do not enter pool while the robotic cleaner is in water.
The Home Screen
#E5E5E5
Cleaner
Status
#434B58
Next Scheduled
Cleaning Time
#2A3D56
Current
Cleaning Mode
#141E2E
#F26522
Start / Stop
Cleaning
View Cycle Time
Remaining
Decrease Cleaning
Cycle 30 Minutes
Remote Control
Mode
NOTE: Image of screen layout is subject to change due to periodic updates to the app.
Control
™
System
Name
Robot ABC
Cleaning
NEXT CLEANING: Monday, 12:00 pm
STOP
00:21
30
Remote Control
Cleaning Mode
System
Settings
Dirty Canister
Indicator
FULL
Increase Cleaning
Cycle 30 Minutes
30
Lift System
Mode
Lift System
Set Cleaning
Mode
Page 19