Ntroduction; Scope Of Delivery, Unpacking And Inspection; Warranty - Dynacord D 11A Mode D'emploi

DYNACORD
1 Introduction
The DYNACORD D 11A is a powered, biamped, light-weight
and extremely robust high-performance professional 12"
2-way fullrange plastic cabinet for use in professional
sound reinforcement applications. With a variety of sus-
pension accessories and conservative cosmetics, the
D 11A is also ideally suited to be used in demanding fixed
installations. The cabinet is manufactured from Polypro-
pylene and therefore is extremely resistant against abuse
on the road. For low frequencies a LFT3508 is used. The
Electro-Voice DH 3 driver is used for the projection of mid
and high frequencies. The Constant-Directivity HF horn has
been integrated into the baffle by CAD methods. Nominal
coverage angle of the cabinet is 80° * 40°, horizontal * ver-
tical respectively.
The built-in digital power amplifiers are working in bi-
amped operation and are controlled by an electronic x-
over circuit that has been designed to optimally match the
transducers' acoustic characteristics. The D 11A is ideally
suited for applications as full-range cabinet or as Mid-Hi
cabinet in high-performance satellite systems. EASE and
Ulysses data allow fast and precise simulations.
The multitude of connection and setting facilities (MIC,
LINE, AUX) allows using the D 11A in many creative ways.
The master signal can be daisy-chained to a second D 11A
cabinet via a regular XLR microphone cable. The built-in
level control VOLUME allows easy adjustment of the re-
quired sound pressure level.
The D 11A is connected to the mains via a locked IEC inlet
that guarantees a hassle-free operation. Extremely durable
acoustic foam mounted to a strong powder-coated steel
grille protects the loudspeaker components against any
mechanical damage. A protective cover is available as an
option. The trapezoidally shaped enclosure also allows em-
ploying the cabinet in monitoring applications that require
extended low-frequency response compared to regular
monitor speakers. A stable, integrated carrying handle and
the integrated stand socket for pole-mount stands allow
easy transportation and setup.
1.1 Scope of Delivery, Unpacking and
Inspection
• 1 Active Cabinet
• 1 Owner's Manual (this document)
• 1 Mains Cord (lockable, 5 meters)
• 1 Warranty Certificate including Safety Instructions
Carefully open the packaging and take out the cabinet. In-
spect the cabinet's enclosure for damages that might have
occured during transportation. Each cabinet is examined
and tested in detail before leaving the manufacturing site
to ensure that it arrives in perfect condition at your place.
Please inform the transport company immediately if the
cabinet shows any damage. Being the addressee, you are
the only person who can claim damages in transit. Keep
the cardboard box and all packaging materials for inspec-
tion by the transport company.
Keeping the cardboard box including all packing materials
is also recommended, if the cabinet shows no external
damages.
4
CAUTION: Do not ship the cabinet in any other than its
original packaging.
When shipping the cabinet make sure to always use its
original box and packaging materials. Packing the cabinet
like it was packed by the manufacturer guarantees opti-
mum protection from transport damage.

1.2 Warranty

Visit www.dynacord.com for warranty information.
HINT: This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this
equipment in a residental area is likely to cause
harmful interference in which case the user will
be required to correct the interference at his
own expense.
NOTES: This equipment has been tested and found to
comply pursuant to the product family
standard for audio professional use according
EMC Directive 2004/108/EC: EN55103-1 and
EN55013-2 standards (with the limits for E4
and E5 electromagnetic environment);
EN61000-3-2, EN61000-3-3.