Step 3 - Install The Ir Systeme Technik - AEI Security & Communications DigiSender ZX7 Mode D'emploi

Step 3 - Install the IR Systeme Technik™

Once set up correctly, the IR Systeme Technik™ will enable you to control your source equipment
from the receiving location in your home.
Because everyone's set up is different there are many ways you can install the IR Systeme Technik™
and the various included accessories will help you in setting it up correctly.
Accessory #1
Extension Pieces
Accessory #2
Example 1
Mount the IR Emitter vertically using acces-
sories 1 and 2. Ensure the LED is facing the
remote control pick up point on your source
equipment.
Please read this instruction manual carefully prior to installation
DG458 - DigiSender® ZX7 - Quad Input 5.8GHz Wireless AV Sender
IR Emitter
Example 2
Mount the IR Emitter horizontally using the sup-
plied sticky pad. Ensure the LED is facing the
remote control pick up point on your source
equipment.
ENGLISH (EN)
Page 07