Step 2 - Install The Transmitter - AEI Security & Communications DigiSender ZX7 Mode D'emploi

Step 2 - Install the Transmitter

The Transmitter will send the audio and video from a connected source (your Satellite receiver or
DVD Player for example) to the Receiver, located in another room in your home.
1.
Connect DigiConnector™ 1 to your Satellite,
Cable or Freeview box. Use the SCART socket
labelled 'TV' or 'OUT'. Connect any existing
SCART lead into the rear of the DigiConnector™.
3.
Ensure that the Audio/Video and Remote Relay
Channel switches on the back of the Transmitter
are set to 1.
Please read this instruction manual carefully prior to installation
DG458 - DigiSender® ZX7 - Quad Input 5.8GHz Wireless AV Sender
2.
Connect DigiConnector™ 2 to your DVD Player,
HDD Recorder or VCR. Use the SCART socket
labelled 'TV' or 'OUT'. Connect any existing
SCART lead into the rear of the DigiConnector™.
4.
Connect the IR Emitter to the socket labelled 'IR'
on the back of the Transmitter. See Page 07 for
more information on installing the IR Systeme
Technik™.
ENGLISH (EN)
Page 05