AEI Security & Communications DigiSender ZX7 Mode D'emploi page 15

cont...
I see a snowstorm effect or
Switch OFF your DigiSender® RECEIVER.
Q: What do you now see at the second TV?
I now see a Black screen
NOT RECEIVING
SIGNAL
1. Switch the DigiSender®
Receiver back on.
2. Ensure the DigiSender®
Transmitter is switched on.
3. Try the other 3 available
Audio/Video channels ensuring
that the Audio/Video Channel is
set the same on both the
Transmitter and Receiver.
Please read this instruction manual carefully prior to installation
DG458 - DigiSender® ZX7 - Quad Input 5.8GHz Wireless AV Sender
plain blue screen
I still see a snowstorm or
blue picture
WRONG TV
CHANNEL SELECTED
This indicates that the correct
SCART Channel has NOT been
selected on the second televi-
sion. Look for buttons on this tel-
evisions remote control which
could select the AV Channel
such as EXT, AV, VIDEO, VCR,
AUX, Channel 0 AND
I see lines over the picture
INTERFERENCE
This indicates one or more elec-
trical devices are interfering
with the DigiSender®. Make sure
the Transmitter and Receiver are
not directly on top of other elec-
trical devices.
Audio/Video Channels on your
DigiSender® as one or more may
still be available.
digisender.net or contact our
helpline for information on con-
figuring your equipment to work
together.
.
ENGLISH (EN)
Try all 4
Visit
Page 15