ENGLISH (EN)
DG458 - DigiSender® ZX7 - Quad Input 5.8GHz Wireless AV Sender
continued...
Note:
Try to avoid positioning the Transmitter directly on top of other electrical devices as this could lead
to a poor picture.
5.
Connect the Power Supply Unit (PSU) to the
socket labelled 'POWER' on the rear of the
Transmitter.
What's the
The Contrast (A/B) switch is present to compen-
sate for differences in equipment set-ups.
Once installation is
complete, if you
experience a poor
picture try
adjusting the
A/B setting.
Page 06
A/B
switch for
6.
Connect the Power Supply Unit (PSU) to an
available mains socket and switch on at the back
of the Transmitter.
??
Please read this instruction manual carefully prior to installation