Tivoli Audio PAL+ Manuel Du Propriétaire page 14

English
NOTE: During a power outage, the alarm time(s) and clock will be maintained by an inte-
grated back-up memory. When "Auto update" is set to "Update from any", the radio may
find the clock signal from the last listened station, even when the PAL+ is in standby.
Set date format:
Press the Select button and use the pq and Select buttons to choose the date format
you prefer.
5. BACKLIGHT (FOUND UNDER SETTINGS):
Timeout:
The backlight level is configured at the factory to be constant. However, you can
customize the backlight to automatically change to a "Dim level" setting after a fixed
period of time whenever no controls are used. Once a control on the unit or the remote
is pressed, the normal backlight level is restored.
Press Select and use the pq and the Select buttons to set the amount of time it will
take for the backlight to change to the dim level from 10, 20 ,30, 45, 60, 90, 120, or 180
seconds, or to keep the timeout feature Off.
On Level:
Press Select and use the pq and Select buttons to choose the intensity of the backlight.
Dim Level:
If you selected a time for the backlight to change to a dim setting under "Timeout",
press Select and use the pq and Select buttons to choose the intensity of the backlight
when it changes to this dim setting. Setting the Dim level to "Off" may be desirable if
the display backlight is bothersome while sleeping. Using the Dim level feature may
also help to maximize battery playback time.
6. LANGUAGE (FOUND UNDER SETTINGS): Press Select and use pq and Select
buttons to set your language.
7. FACTORY RESET (FOUND UNDER SETTINGS): Press Select and use the pq or t u
and Select buttons to confirm (Yes) or reject (No) the factory reset. A factory reset will
restore factory defaults and cancel all your personal settings, such as station presets
and language.
8. ID (FOUND UNDER SETTINGS): Press Select to view the ID. If you contact your dealer or
Tivoli Audio with a question, you may be asked to provide the number shown in this field.
9. SLEEP (FOUND UNDER SETTINGS): Press Select and use the pq arrow and the
Select buttons to set the sleep timer to one of the available times. There is also a dedi-
cated Sleep button on the remote control. A small clock face will show on the display
when the Sleep timer is active.
NOTE: When operating on battery-only power (external adapter not plugged-in), if Sleep
is engaged and the alarm is set, after Sleep ends, the alarm will not sound. To use both
Sleep and Alarm features, please be sure the external adapter is connected.
14