Bialetti BREAK CF67S Instructions D'emploi page 44

9. Troubleshooting
Problem
The machine will not
heat up.
The machine will not
pour coff ee.
The coff ee is cold.
The machine does not
dispense and the button
light blinks red for 3 s.
Cause
The machine is not
connected to the mains
power.
The machine is not
switched on.
The capsule is stuck or
badly positioned.
A capsule may have fall-
en into the machine.
There is no water in the
tank.
The pipes are clogged
with scale.
The machine has not
completely heated the
water before pouring the
coff ee.
The machine is partly
clogged by scale.
A plastic capsule has
been inserted.
The capsule has not
been inserted.
Solution
Connect the machine to
the mains power.
Use the ON/OFF button
to switch on the ma-
chine.
Unplug the machine
from the power mains
and wait for it to cool
down; lift the lever and
remove the capsule
manually.
Use a tool, never use
fi ngers.
Take out the capsule
compartment and check.
Fill the tank with water.
Carry out a scale remov-
al cycle.
Before pouring coff ee,
always wait for the cup
symbol in the top part
of the central switch to
turn green.
Carry out a scale remov-
al cycle.
Insert an aluminium
capsule and repeat the
dispensing cycle.
To clean the machine,
start a cleaning cycle by
pressing the pour button
for 5 seconds.
EN
47