Power Supply
On/Off Button
Power on or off your notebook by pressing the on/off button (11) briefly.
The operational indicator will inform you about the operational status of the notebook.
The notebook will always be switched off, if the main switch is pressed for more than
4 seconds.
Warning!
Do not switch off your notebook while the hard disk or the optical drive is
running and the corresponding media activity LEDs are lit. Otherwise
data may be lost. To protect the hard disk you should always wait for
20 seconds after powering down the notebook before powering it up again.
Power Adapter
Your notebook is supplied with a universal AC power adapter, which automatically adjusts
to the available power source. The following levels are supported: AC 100-240V~/ 50-
60 Hz. Please follow the power supply safety instructions found on page 5.
The power adapter is connected via a power cord to an AC outlet. The DC power lead
from the power adapter is connected to the back side of the notebook (29).
Power Supply
27