Getting Started; How To Start; Getting Started - Medion AKOYA EXTREME X7810 Mode D'emploi

Getting Started

Before you get started using your notebook, first take a few moments to read the
important section on Safety. This notebook comes with software fully pre-installed.
You do not have to install any of the discs supplied.

How to start:

Step 1
•
Insert the battery before bringing the notebook into operation by sliding the battery
pack into the compartment. Lock the battery under all circumstances, in order to
avoid it falling out unintentionally.
•
Connect the supplied power adapter to the notebook at the notebook power
socket (29). Connect the power adapter via a power cable to a free AC power
outlet.
•
Push the left lock to the symbol „unlock".Open the display by pushing the right lock
to the right with your thumb and then opening the display to the required position
with your thumb and index fingers. Do not forcibly open it.
•
Please ensure that the battery is inserted and the power adapter connected when
operating the Notebook for the first time. If you fail to do this, Windows Vista® will
not be able to calculate the performance index correctly.
•
Switch the notebook on by operating the On/Off Switch (11). The notebook starts
and now goes through a number of phases.
Note
Make sure there is no bootable disc (e.g., the Recovery disc) in the optical
drive. Such discs will prevent the operating system from loading off the hard
drive.
The operating system is loaded from the hard disk. During the initial set-up, the loading
process takes slightly longer than normal to register the operating system and the
individual components completely. Your operating system is finished loading when a
welcome screen is shown on your display.
20

Getting Started