Connecting; Power Supply - Medion AKOYA EXTREME X7810 Mode D'emploi

Connecting

Pay attention to the following information, in order to connect your notebook correctly:

Power supply

•
Do not open the power adapter housing. When the housing is open there is a
danger of severe electric shock. It contains no user-serviceable parts.
•
The electric outlet must be in the vicinity of the notebook and within reach of the
power adapter cables.
•
To disconnect your notebook from the power source, or set the notebook to
battery operation, remove the power cord from the notebook's power socket.
•
Only use the notebook with a power adaptor operating at
AC 110-240V~/50-60 Hz. For details on power consumption, please refer to the
rating plate on the rear of your notebook. If you are unsure of the type of power
supply available at the point of use, ask your local power company.
•
Use only the supplied power cord and power adapter.
•
If using an extension cord, make certain that it meets your local safety
requirements. If in doubt, consult an electrician.
•
To provide additional protection against electric shock, power surges, lightning
strikes, or other electrical damage to your notebook, we recommend the use of a
surge protector.
•
Firstly remove the plug, and then the connector of the notebook, from the power
source, if you want to detach the network adapter from the mains power supply. A
reverse sequence could damage the network adapter or the notebook. Always hold
the connector firmly when removing it. Never pull on the power cord.
Safety Instructions
7