User Parameter Programming; Using The Remote Control - Vitrifrigo STR6000 Manuel D'emploi

5.6

User parameter programming

Access the user parameter programming menu on the display by pressing key A and D on the control panel
simultaneously or using key 5 on the remote control.
Use the E and F keys on the keyboard to scroll through the menu items.
Use the B and C keys to select the menu items.
PARAMETER
Parameters release
password
Cab tilt
sensor
Sound
buzzer
Unit
Temperature
Select
Language
5.7

Using the remote control

The air conditioner can also be controlled via the infra-red remote control supplied. The keys on the remote
control are the same as those on the climate control panel, and the functions correspond perfectly.
Orient the remote control towards the sensor on the front of the appliance. The maximum operating angle is
30° horizontally and 20° vertically.
Avoid any obstacles between the remote control and the sensor. In order for it to work properly, the remote
control must be used at a maximum distance of 2.5 meters (8 feet) from the appliance. The transmission
window of the remote control and the sensor of the appliance must always be clean. Direct sunlight can affect
operation of the remote control.
The remote control uses 1 CR2025 button battery. The battery life depends on the frequency of use. Use
only batteries without harmful substances (lead, cadmium, mercury). Replace depleted batteries immediately
with new ones.
Do not use rechargeable batteries. To replace, remove the rear compartment cover and insert the new
battery, paying attention to the polarity. Reversing the polarity could irreparably damage the remote control.
Refit the battery compartment cover.
The batteries, packaging and the appliance must be disposed of according to the relevant provisions. They
must not be disposed of in household waste.
If the remote control is not used for long periods, remove the battery.
DESCRIPTION
Password selection
Cab tilt sensor
Display sound indicator
Measuring unit of the temperature probes
in degrees
Menu language
Range
0  100
ENABLE (activated)
•
DISABLE (deactivated)
•
OFF (deactivated)
•
• KEYBOARD (keyboard only)
ALARM (alarms only)
•
• KEY+ALARM (key+alarms)
• °C
°F
•
• ITALIAN
• ENGLISH
34
Default
0 = Excluded
ENABLE
KEY+ALARM
°C
ITALIAN