Description Of The Appliance - Vitrifrigo STR6000 Manuel D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

4

DESCRIPTION OF THE APPLIANCE

The STRATOS air conditioner to which this manual refers has been designed, satisfying the high
requirements imposed, for the purpose of air conditioning of the cab of heavy transport vehicles (trucks),
during rest breaks, therefore with the vehicle stopped and off.
The air in the passenger compartment is suctioned in through the grille (no.7 in figure 2) treated by the
evaporating coil and returned to the passenger compartment by the vents (no.6 in figure 2) cooled and
dehumidified.
The air conditioner has 3 different modes to meet a variety of needs.
AUTO mode
The system works autonomously, adjusting the operation in order to ensure maximum performance.
ECO mode
The system works autonomously, regulating operation in order to guarantee the maximum duration of
operation. The electronic board regulates fan and compressor speeds to minimise consumption and to
increase operating autonomy.
NIGHT mode
The system works autonomously, adjusting operation to guarantee excellent performance. The electronic
board regulates the speed of the fans and the compressor to minimise noise inside the cab.
The Stratos air conditioner is able to lower the cab temperature until the determined setpoint is
reached. The temperature reached depends on the vehicle model and the type of cab, the external
ambient temperature and on other environmental factors.
The system is equipped with a vehicle battery check appliance. If the battery voltage drops below a certain
limit, the air conditioner switches off automatically to protect the battery.
The air conditioner will return to operation when the battery voltage has risen above the default level.
27
EN

Publicité

Table des Matières
loading

Table des Matières