CAPITAL SPORTS ERGO 1G Mode D'emploi page 20

Step 2
• Insert the Upright Post Cover (10) into the Upright Post (16) and then connect Sensor Wire (11) well with Extension
Wire (13).
• Fix the Upright Post (16) on the post of Main Frame (1) with Hex bolt (14) and Arc Washer (15) as shown.
• Put Pulse Sensor Wire (22) out of computer bracket hole on the Upright Post (16).Adjust the Handlebar (29) to a
suitable position and then fix it onto the Upright Post (16) with Flat Washer (24), Spacer (25) and T shape Bolt (26).
20