Airwell DLS VAV SYSTEM Manuel D'installation Et D'utilisation page 19

ACQUAInTAnCE WITh ThE REMOTE COnTROL
1. On/Off pushbutton
2. Pushbuttons
temperature
3. Manual /
pushbutton
4. Operating mode display
5. Desired temperature display
6. Transmission indicator
7. "Off" condition indicator
8. Temperature sensor
9. Inactive pushbutton
There are two posiabilities of Display and
Operation.
For Round dampers we have the Plastic receiver
housing.
For Rectangular Grills the I/R receiver and the
green indication LED are located at the frame of
the grill
DISPLAY AnD OPERATIOn (RECEIVER) UnIT
Round dampers:
The receiver unit includes lights and a pushbutton,
which enables manual operation when the remote
control is failing or missing (emergency case).
1. Emergency pushbutton
This pushbutton is to be applied when the remote
control does not function, is missing or when the
Batteries power is low. Depressing the pushbutton
(1) once will open the damper to one third and the
green light (2) will turn on. Depressing it again will
close the damper and the green light (2) will turn
off.
2. Working light (green)
This light indicates that the damper is in working
condition. Flickering of the light (2) indicates
reception of the remote control's transmission.
3. Standby light (red)
This light indicates that the damper is standing by but not working.
for elevating
Automatic condition
and lowering
selecting
3
1
E n g L I S h
2
19