Airwell DLS VAV SYSTEM Manuel D'installation Et D'utilisation page 18

gEnERAL
‹ The VAV SYSTEM connects to mini-central air conditioners to facilitate
independent control over the temperature at each room for the occupants'
comfort and disconnection of air supply to unoccupied rooms in order so
save energy.
‹ The system includes an electrically operated air damper, a remote control
and a sensor in every room. The damper controls the volume of conditioned
air entering the room, with the system setting the room's temperature by
opening and closing the damper as required.
‹ The air conditioning setting, cooling or heating, is determined by the air
conditioner itself.
‹ The remote control's range is up to 7 meters.
‹ To transmit orders, the remote control must be aimed at the sensor. Take care
of aiming it directly at the sensor, with no object obtruding in between.
‹ The sensor responds to signals transmitted from the remote control. The
sign of reception is the flickering of the sensor's lights.
‹ The sensor and the remote control must not be exposed to sunlight or to
fluorescent light. Neither should they be exposed to any other source of
heat.
‹ Care must be taken to avoid placing the remote control exposed to air flow
coming from the grid on the wall.
BATTERIES InSERTIOn
The Batteries compartment is located on the back of the remote control. Slide
down the cover and insert the
Batteries into the Batteries
compartment, according to the
illustration.
Two AAA alkaline Batteries are
to be used.
18