Hama RC 330 Mode D'emploi page 6

Note
• The clock automatically changes from set-up mode to time display mode if no keys are
pressed for 15 seconds.
• Explanation for the time zone display:
You can manually adjust the clock to the time zone of a country (up to 1500km
distance to Frankfurt/Main) where the clock receives the DCF signal but where the
actual time differs from the time received.
• If, e.g. the time in a given country is 1 hour ahead of the German time, set the time
zone display to 01. The clock is now DCF controlled but the time is one hour ahead.
4.3. Alarm
Daily alarm set-up
• Press and hold the key "ALARM" (13) for 3 seconds ,the flashing alarm 1 time are shown.
• The hour display of the alarm 1is flashing. Use "p" und "q" to select the hour.
• Press "ALARM" (13) to confirm.
• The minutes display of the alarm 1is flashing. Use "p" und "q " to select the minutes.
• Press "ALARM" (13) to confirm.
• When the flashing for alarm 2 , the same setting as for alarm 1.
Daily alarm on/off
• Press "ALARM" (13) one time to activate the alarm 1 symbol.
• Press "ALARM" (13) again, cancel alarm 1 symbol, activate alarm 2 symbol.
• Press "ALARM" (13) again, alarm 1 and alarm 2 symbols are both activated.
• Press "ALARM" (13) again, alarm 1 and alarm 2 symbols are both cancelled.
• When showing the alarm symbol, meaning the alarm function is on.
Note
• The clock automatically changes from alarm set-up mode to time mode if no keys are
pressed for 15 seconds.
• The alarm sounds for 2 minutes if no key is pressed to stop it.
5