HP OFFICEJET 4500 Guide De Mise En Marche Rapide page 11

Step 3: Configure fax settings
Usually, the printer's default fax settings are
after you have connected the printer to a
phone line, set the fax settings to meet
your needs.
1. On the printer's control panel, press
the (Setup) button.
2. Select the setting you want to configure:
If you want to configure this setting...
Auto Answer
Set the answer mode to On if you want the
printer to automatically answer incoming
calls and receive faxes. The printer will
answer these incoming calls after the
number of rings that has been specified in
the Rings to Answer setting.
Rings to Answer (Optional)
Set the number of rings to answer
Note: The number of rings to answer
for the printer should be greater than
the number of rings to answer for the
answering machine.
Where can I change fax settings?
You can configure fax settings using the
following tools:
Printer's control panel
Press the (Setup) button on the
printer's control panel, select Fax
Settings, and then select the setting you
want to configure.
HP software
If you have installed the HP software on
your computer, you can configure fax
settings using the HP Solution Center
Software (Windows) or HP Utility (Mac
OS X).
For more information about using these
tools or settings, see the user guide.
...do this:
1. Press the or
Fax Settings, and then press OK.
2. Select Answer Options, and select Auto
Answer.
3. Select On or Off, and then press OK.
1. Press the or
Fax Settings, and then press OK.
2. Select Answer Options, and then select
Rings to Answer.
3. Enter the appropriate number of rings,
and then press OK.
buttons to select
buttons to select
Fax 11