Télécharger Imprimer la page

BEBE CONFORT Beryl Mode D'emploi page 56

Publicité

EN
The ISOFIX anchors have been developed to
obtain a safe and easy fixation of the child
safety systems inside the car. Not all cars are
equipped with these anchors although they
are standard on more recent models.
Baby in the Beryl car seat:
• Make sure you can fit no more than one
finger between the harnesses and your child
(1cm). If there is more space than 1 cm, tighten
the harness belt further.
• Make sure the headrest is adjusted to the
proper height.
CARE
Inlay:
The inlay included in your Beryl seat plays an
integral part in the e ciency of the restraint
system for your child from 0 to 13 kg. It can
be removed and the cover can be taken o
for washing, but it is essential to place it
back again where it belongs and only use this
o cial Bébé Confort Beryl inlay. This inlay is
exclusively for use with the Beryl seat.
Fabric:
The cover, the shoulder pads and the crotch
pad can be removed for washing. If the
cover needs to be replaced at any time, only
use o cial Bébé Confort cover because it
constitutes an integral part of the restraint
performance.
I
I I
56
Beryl
Bébé Confort
190000267_BBC_014802802_Beryl_scenariomanual_insert_116X116MM_v8.indd 56
25/04/2019 09:37

Publicité

loading