Festo CPX-FVDA-P Mode D'emploi page 33

CPX-FVDA-P...
Technical data
– Max. peak current per channel
– Max. residual current per module
– Voltage drop per channel under
continuous load
– Wire break detection (CH1, CH2)
– Cable length (CH1, CH2)
– Load capacitance to FE
– Load capacitance P-M
– Load inductance
– Fuse protection (short circuit)
– Switching logic at outputs
Function characteristic values
– Module code
– Sub-module code
Safety characteristic values
– Safety function
– Safety Integrity Level (SIL)
– Performance level (PL)
– Disconnection scheme by channel
– Diagnosis of external channel faults
Festo CPX-FVDA-P... 1011NH English
CPX-FVDA-P
[A] 5, for t < 50 ms
[A] 5
[V] max. 0.6
Configurable, I
[m] max. 200
[nF] max. 100
[µF] max. 2.2
[mH] 1000 at 150 mA, 100 at 600 mA;
for characteristic curve, see manual for
type P.BE-CPX-SYS-F-...
Internal electrical fuse per channel
PM switching
193d (C1h)
1d (01h)
– Safe disconnection of output channels in
compliance with EN 61508 with SIL3
– Safe disconnection of output channels in
compliance with ISO 13849 with Cat. 3
and PL e
– Safe disconnection of output channels in
compliance with EN 62061 with SIL CL3
Safe disconnection/SIL 3
Safe disconnection / Kat. 3, PI e
P and M switching
– Cyclic functional check
– Cyclic check for external feed
– Cyclic check for cross circuit
< approx. 50 mA
L
33