Aspire Feedlink Revvo Boost Set Manuel D'utilisation page 47

Using the Device
Changing the Atomizer Head
1. Screw the top unit counterclockwise from the clearomizer tank.
2. Loosen the funnel-shaped fastening screw and completely unscrew it
from the thread.
3. Remove the old head by lifting it over the filling tube.
4. Insert a new head. Please make sure that the head is correctly placed
and that it closes flush with the edge.
5. Fix it in place by reattaching the fastening screw.
6. To finish, reconnect the top unit to the clearomizer.
Please note the following:
Prior to first use, drip a few drops of your e-liquid on the atomizer head and let it sit in the liquid-filled tank for around
15 minutes after installation before you start vaping. To do this, please turn the clearomizer upside down. Do not
clean the head with water. If necessary, simply wipe with a dry cloth Because atomizer heads are wearing parts, they
must be changed regularly.
45