Using The Device; Installing The Battery - Aspire Feedlink Revvo Boost Set Manuel D'utilisation

Using the Device

Operating Instructions
Fully charge the necessary and replaceable 18650 battery before first use. Ensure that there is no visible damage
to the surface of the battery cells. Please note the marking of the negative pole on the screw cap of the battery
compartment.The device has a 510-pin connection with a spring-loaded connector, making it suitable for a variety
of squonk capable clearomizers.
Note for Cleaning
Use a dry cloth or cotton swab to clean the device.

Installing the Battery

Open the battery cover as shown in the figure and place the
charged 18650 battery in the unit according to the marked
pin. Close the battery compartment again.
Power On / Off
Press the Fire button rapidly five times within two seconds to switch on the device. Turn the device off in the same fashion,
by pressing the Fire button quickly 5 times. We recommend that you switch off the device during transport and during long
periods of non-use.
42