Specifications - Samlex Solar SCC-30AB Mode D'emploi

CHARACTERISTICS
SySTEM
Nominal system voltage
Current rating
Set point accuracy
Minimum voltage to start the micro-controller,
activate protections and guide operation
Total self consumption current
INPUT SIDE (Solar panel / array)
Maximum open circuit voltage Voc of the solar panel/array
Maximum operating voltage of the solar panel/array
Maximum short circuit current Isc of the solar panel/array
BATTERy CHARGING
Charging algorithm
Charging stages
Battery Temperature Compensation
Voltage coefficient of Temperature change when using optional
Battery Temperature Sensor (BTS ) - Model DC-BTS-A-C
Temperature compensation range
PROTECTIONS
High temp shutdown
(Temp of the face plate that is used as a heat sink)
Over current (overload) shut down
DISPLAy
Backlit LCD
LED

SpecificationS

SPECIFICATIONS
12 VDC or 24 VDC
(Selected by DIP Switch)
30 A
+ / - 50 mV
9 VDC for 12 V Battery System
18 VDC for 24 V Battery System
50 mA
50 VDC
34 VDC
30 A
PWM
Bulk, Absorption, Float, Equalize
(Selectable)
With optional Battery Temperature
Sensor (BTS), Model DC-BTS-A-C
supplied with 10 metres of wire
- 5mV / ºC / cell (25 ºC reference)
- 10mV / ºC / cell (25 ºC reference)
0 ºC to +50 ºC
90 ºC disconnect solar panel/array
70 ºC re-connect solar panel/array
45 A
2 lines X 16 characters, alpha
numeric
1 LED for status display
8
47