WALTERSCHEID SW41 Mode D'emploi page 82

SAFETY INSTRUCTIONS
Explanations of the warning signs
Part number and description
SW40-050 / SW41-033
Read and observe the operating manual and
safety instructions before you put the special
tool into operation.
26
The following list contains:
all the warning signs present on the special tool in the
•
right-hand column,
the following information about the warning sign on the
•
right in the left-hand column:
1. The part number.
2. The description of the hazard, e.g. "Crushing hazard for
fingers or hands when moving the mounting carriage by
the approach of moving parts to stationary parts!"
3. The consequences for ignoring the instruction(s) for
prevention of the hazard, e.g. "These hazards can cause
severe injuries with loss of parts of the body".
4. The instruction(s) for preventing the hazard, e.g. "Never
reach into the dangerous place while parts can still move.
Send any third persons out of the danger zone of the
special tool before you move the mounting carriage".
Warning Sign