Automatic Swivel Function; Controlling The Camera; Remote Control - Conrad 75 11 71 Notice D'emploi

b) Automatic swivel function
By pressing the „PAN" key (H), the automatic swivel function can be activated.
The automatic swivel function can be activated by pressing the „AUTO" key on
the remote control.
Explanation of the automatic swivel function
Pressing the PAN button causes the camera to pan 6 times with different pauses in between. Then the auto-
matic swivel function becomes inactive.
c) Controlling the camera
Swivelling
Press the right and left arrow keys of the „control cross" (D) to swivel the currently selected camera into
the desired position.
Tilting
Press the up and down arrow keys of the „control cross" (D) to set the desired tilting degree of the cur-
rently selected camera.
You can of course operate the tilt and swivel function via the remote control. To
this end, use the existing control cross on the remote control in the same way.
d) Remote control
Remove the protective battery foil from the battery com-
partment of the remote control as illustrated to the right (if
you have not already done so upon delivery).
Arrow buttons:
Use the arrow buttons to pan or tilt the camera.
CH1 button and CH2 button
Buttons CH1 and CH2 allow you to select the desired camera channel.
AUTO button
Pressing the AUTO button enables the automatic swivel function.
25