Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GETTING STARTED
To start your dishwasher, refer to the following quick reference guide.
Starting Your Dishwasher
1. Load the dishwasher (see
pages 6-7).
2. Fill the detergent dispenser
(see page 8).
3. Fill the rinse aid dispenser
(see page 8).
4. Select desired energy option
(see page 10).
Stopping Your Dishwasher
You can stop your dishwasher anytime during a cycle. Simply unlatch the door and wait for
the water action to stop.
Normal Operation
The following conditions are normal and indicate proper operation.
• Motor sounds will be heard before water enters the tub.
• Short time delays occur after a cycle is selected and between washes and rinses.
• A small amount of clean water will remain in the bottom of the tub after each cycle.
LOADING YOUR DISHWASHER
It is not necessary to rinse dishes before putting them into the dishwasher. Just remove large
pieces and quantities of food and bones. Empty cups and glasses. It may be necessary to
presoak or lightly scour firmly cooked-on or baked-on foods.
Always load dishes so soiled surfaces are reached by water spray from rotating spray arm or
center wash tower. Water must be able to drain off completely for best results.
5. Turn cycle indicator knob
clockwise to the cycle you
want (see page 9).
6. Turn on hot water nearest
the dishwasher and let run
until water is hot. Turn water
off.
7. Firmly close door to latch
and start dishwasher.
6
Publicité
Table des Matières
