Excell EPW2123100 Mode D'emploi page 8

ASSEMBLY INSTRUCTIONS (CONT.)
• SAVE ALL INSTRUCTIONS
5. Assemble the lower gun hook using
(1) M6 x 45mm long socket head cap screw,
(1) M6 nut, and the supplied hex wrench and
open-end wrench (FIG 9). Tighten securely
(FIG 10).
6. Assemble the upper gun hook using
(1) M6 x 45mm long socket head cap screw,
(1) M6 nut, and the supplied hex wrench and
open-end wrench (FIG 11). Tighten securely.
Assemble the wand by screwing together
the threaded connections of the two wand
halves. Hang the wand on the upper gun
hook, as shown in FIG 12.
7. Assemble the upper hose hanger using (2)
M6 x 45mm long socket head cap screws,
(2) M6 nuts, and the supplied hex wrench
and open-end wrench (FIG 13-16).
Tighten securely.
8. Final unit assembly (FIG 17).
9. A spark plug removal tool is included for
future maintenance (FIG 18). See provided
engine manual for spark plug maintenance
procedures.
Copyright © 2017 MAT Industries, LLC
FIG 9
FIG 11
FIG 13
M6 nut
M6 X 45mm
head cap screw
FIG 15
FIG 17
8 - ENG
FIG 10
upper gun hook
FIG 12
FIG 14
M6 nut
M6 X 45mm
head cap screw
FIG 16
FIG 18