Engine And Pump Features; Operating Connections; High Pressure Hose; Water Connection - Excell EPW2123100 Mode D'emploi

ENGINE AND PUMP FEATURES - FIGURE 1
• SAVE ALL INSTRUCTIONS
AIR FILTER
THROTTLE
LEVER
CHOKE LEVER
FUEL ON/OFF
RECOIL
STARTER

OPERATING CONNECTIONS

• SAVE ALL INSTRUCTIONS

HIGH PRESSURE HOSE

Attach the high pressure hose to the outlet
connection located on the pump. (See Figure 1).

WATER CONNECTION

Before connecting to unit, run water through
the garden hose (not supplied) to flush out any
foreign matter. Check that the screen is clean
and is in the inlet of the pump. Attach garden
hose to the inlet connection located on the
pump. (See Figure 1).
NOTE: The water supply must provide a
minimum of 4 GPM at 40 to 80 PSI or the
pump will be damaged.
Copyright © 2017 MAT Industries, LLC
FUEL FILL
OUTLET
CONNECTION
INLET
CONNECTION
ENGINE
ON/OFF
SWITCH
10 - ENG
SIPHON
INJECTOR
THERMAL
RELIEF VALVE
OIL FILL
OIL DRAIN