Excell EPW2123100 Mode D'emploi page 3

IMPORTANT SAFETY INSTRUCTIONS (CONT.)
• SAVE ALL INSTRUCTIONS
RISK OF EXPLOSION FOR FIRE
DA NGER
WHAT CAN HAPPEN
• Spilled gasoline and its vapors can become ignited from
cigarette sparks, electrical arcing, exhaust gases and hot
engine components such as the muffler.
• Heat will expand fuel in the tank, which could result in
spillage and possible fire explosion.
• Operating the pressure washer in an explosive
environment could result in a fire.
• Materials placed against or near the pressure washer
can interfere with its proper ventilation features causing
overheating and possible ignition of the materials.
• Muffler exhaust heat can damage painted surfaces, melt
any material sensitive to heat (such as siding, plastic,
rubber, vinyl, or the pressure hose, itself), and damage
live plants.
• Improperly stored fuel could lead to accidental ignition.
Fuel improperly secured could get into the hands of
children or other unqualified persons.
• Use of acids, toxic or corrosive chemicals, poisons,
insecticides, or any kind of flammable solvent with this
product could result in serious injury or death.
RISK OF FLUID INJECTION AND LACERATION
DA NG ER
WHAT CAN HAPPEN
• Your pressure washer operates at fluid pressures
and velocities high enough to penetrate human and
animal flesh, which could result in amputation or other
serious injury. Leaks caused by loose fittings or worn
or damaged hoses can result in injection injuries. DO
NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a
physician immediately!
• Injuries can result if system pressure is not reduced
before attempting maintenance or disassembly.
HOW TO PREVENT IT
• Shut off engine and allow it to cool before adding fuel to
the tank.
• Use care in filling tank to avoid spilling fuel. Move
pressure washer away from fueling area before starting
engine.
• Fill tank to ½˝ (12.7 mm) below bottom of filler neck to
provide space for fuel expansion.
• Operate and fuel equipment in well-ventilated areas
free from obstructions. Equip areas with fire extinguisher
suitable for gasoline fires.
• Never operate pressure washer in an area containing dry
brush or weeds.
• Always keep pressure washer a minimum of 4´ (1.2m)
away from surfaces (such as houses, automobiles or
live plants) that could be damaged from muffler exhaust
heat.
• Store fuel in an OSHA-approved container, in a secure
location away from work area.
• Do not spray flammable liquids.
HOW TO PREVENT IT
• Inspect the high-pressure hose regularly. Replace the
hose regularly. Replace the hose immediately if it is
damaged, worn, has melted from contacting the engine,
or shows any signs of cracking, bubbles, pinholes, or
other leakage. Never grasp a high-pressure hose that is
leaking or damaged.
• Never touch, grasp or attempt to cover a pinhole or
similar water leak on the high-pressure hose. The stream
of water IS under high pressure and WILL penetrate skin.
• Never place hands in front of nozzle.
• Direct spray away from self and others.
• Make sure hose and fittings are tightened and in good
condition. Never hold onto the hose or fittings during
operation.
• Do not allow hose to contact muffler.
• Never attach or remove wand or hose fittings while
system is pressurized.
• To relieve system pressure, shut off engine, turn off water
supply and pull gun trigger until water stops flowing.
• Use only hoses and accessories rated for pressure
higher than your pressure washer's PSI.
3 - ENG
Copyright © 2017 MAT Industries, LLC