Specified Conditions Of Use; Ec Declaration Of Conformity; Mains Connection - Milwaukee K 540 S Notice Originale

SpecifieD conDiTionS of uSe

The rotary hammer can be universally used for hammer drilling and
chiselling in stone and concrete.
Do not use this product in any other way as stated for normal use.
ec-DeclaRaTion of confoRmiTy
We declare under our sole responsibility that this product is in
conformity with the following standards or standardized documents.
EN 60745, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3,
in accordance with the regulations 2006/42/EC, 2004/108/EC
Winnenden, 2011-01-12

mainS connecTion

Connect only to single-phase AC current and only to the system
GB
GB
voltage indicated on the rating plate. It is also possible to connect
to sockets without an earthing contact as the design conforms to
safety class II.
mainTenance
The ventilation slots of the machine must be kept clear at all times.
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described,
please contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state
the Article No. as well as the machine type printed on the label
and order the drawing at your local service agents or directly at:
Milwaukee Electric Tool, Max-Eyth-Straße 10, D-71364 Winnenden,
Germany.
English
6
Rainer Kumpf
Manager Product Development
Authorized to compile the technical file
SymbolS
Please read the instructions carefully before
starting the machine.
CAUTION! WARNING! DANGER!
Always disconnect the plug from the socket before
carrying out any work on the machine.
Accessory - Not included in standard equipment,
available as an accessory.
Do not dispose of electric tools together with
household waste material! In observance of
European Directive 2002/96/EC on waste electrical
and electronic equipment and its implementation
in accordance with national law, electric tools that
have reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility.