Air Intake Filter; Throttle Valve Handle Clearance Adjustment - adiva AD3 200 Mode D'emploi

AIR IN-TAKE FILTER
G

Throttle Valve Handle Clearance Adjustment

1
2
The air filter element (G) should be serviced at regular intervals by an Authorised ADIVA
Dealer or Workshop unless you have the proper tools, technical data or technically
qualified to do so.
Have the air filter element serviced more regularly when riding in unsually dusty or wet
environments
3
Throttle Free Play: 2.00mm to 6.0mm (0.08 to 0.24 inches)
ADIVA
Use only Genuine Part when replacing the Air-Filter
Element. Using non-ADIVA , Unapproved or wrong Air-Filter
Element may cause premature engine wear and performance
malfunction
• Before you ride each day, check the Throttle
"free-play" and check for smooth Throttle
grip rotation from fully open to fully closed
position and with the handle bar at full left
and full right positions.
• If required locate the Throttle adjustment
under the right handlebar and make
necessary adjustments to the specified
illustration on the right.
• Slide the sleeve (1) left to reveal the
adjustment nuts (2 & 3).
• after adjustment, make sure the nuts are
• fastened using (3) as a "lock" nut
18
Caution
Caution
Always test your throttle rotation
after adjustment and before riding