Hexagon GeoMax ZEL400H+ Manuel De L'utilisateur page 16

Using the
ZDR300 in
detector mode
Accessories
Detector Mode
7 Capture window
8 Magnet
9 Bubble vial
10
11
LCD Display
12 Lower the detector
13 Raise the detector
14 Level
A detector is recommended when it's difficult to see the laser beam (outdoors,
bright light).
1. Press the On/Off button to turn the detector on.
2. Press button (2) (Fine/Coarse) to select the detection mode. A symbol
appears either on the right or left side of the LCD, displaying which mode
was selected.
3. Press the Sound button (3) to select level of sound (mute, normal, high).
Default mode is mute, indicated with no symbol. The sound symbol will
blink when you select normal loudness, and be constant in high mode.
Remote Control Mode
Decrease rotation speed
Increase rotation speed
15 Sound On/Off
16 Battery level
17 Coarse/Fine mode
ZEL400H+ | 14
Calibration Mode
Save calibration data
Change axis