Assembly; Control Panel - CASO DESIGN Cafe Crema One Mode D'emploi

Warning: Crushing hazard!
► Do not touch the area behind and above or behind and beneath the
► Empty the internal drip tray regularly as water is also collected in it.
Check that everything has been assembled correctly.

13.3 Control panel

Buttons:
milk foam function
espresso function
LED displays
Flashing: Water needs refilling or the water tank is not positioned correctly.
Flashing: Bean container is empty. Beans have to be refilled.
Constantly illuminated: Coffee grounds container is full, empty the container
Flashing: Coffee ground container and the drip tray are not placed correctly. Please place
correctly.
adjustable coffee outlet
in the photo.
On/off switch

13.2 Assembly

Place the coffee grounds container on
to the inner drip tray and push it into
the appliance. Then insert the drip tray
with the drip grid.
Adjust the adjustable coffee outlet
according to the selected cups / cup
size. Fill the water tank with water and
insert it.
Exclusively adjust the coffee outlet as shown
.
Please note
Latte macchiato function
hot water function
coffee function
46