Iberspa 43639 Manuel D'utilisation page 24

Press up and down buttons
Press to confirm.
• The 3rd parameter (C1) appears in the display.
Press up and down buttons
digits). Hourly only.
Press to confirm.
• The 4th parameter (C2) appears in the display.
Press up and down buttons
Hourly only.
Press to confirm.
• C1 and C2 fields refer to hours, not minutes.
• If C1 = C2 the circulation pump is always running.
• Press or or wait 10 seconds to exit Time and Filtration Cycle Setting Menu.
PUMPS MANUAL CONTROL MENU. FILTER BACK WASHING
• The system can control up to 5 pumps: 1 filtration pump, 1 to 3 massage pumps, and 1
blower.
• When the system is in MANUAL mode press
Pump), will be shown in the display.
Pressing the PF value turns to ON and pressing
• Press again and the 2nd parameter, BL Blower, will be shown in the display.
Pressing the BL value turns to ON and pressing
again and the 3rd parameter, P1 (Massage pump 1), will be shown in the
• Press
display.
Pressing the P1 value turns to ON and pressing
• Press again and the 4th parameter, P2 (If installed, Massage pump 2), will be shown
in the display.
Pressing the P2 value turns to ON and pressing
• Press again and the 5th parameter, P3 (If installed, Massage pump 3), will be shown
in the display.
Pressing the P3 value turns to ON and pressing
• Press to exit MANUAL mode and the system will turn to AUTOMATIC mode.
To simplify the technical assistance and electronic management all systems have the
same version of software. The System always shows 3 massage pumps that can be
virtually operated even if they are not physically installed .
According to European safety regulations, the system will automatically activate the
filtration pump when a massage or blower pump is in use.
24
to set the minutes (2digits).
to set what time the filtration cycle starts (2
to set what time the filtration cycle ends (2 digits).
and the 1st parameter, PF (Filtration
the PF value turns to OFF.
the BL turns to OFF.
the P1 value turns to OFF
the P2 value turns to OFF.
the P3 value turns to OFF.