Iberspa 43639 Manuel D'utilisation page 22

• The Spa can be controlled from the Front Panel or from the REMOTE SPA buttons,
depending if the AUTOMATIC/MANUAL button is on or off (See Automatic/Manual
function).
• Filtration cycles and temperature.
When the system is in STAND BY (Ecomode) mode:
• The ON/STANDBY button is not lit and the display shows the current time.
• FRONT PANELl buttons, REMOTE SPA Buttons, massage and blower pumps, light and
all other buttons except ON/STANDBY button are inactive and unlit.
• Circulation pump is automatically activated every 30 seconds.
• Heater is automatically activated for keeping programmed (set point) temperature.
• Anti-stagnation function Active (see System Fixed Features).
• Anti-freeze function Active (see System Fixed Features).
UP AND DOWN
131 132
Increase and decrease a certain value or activate and deactivate the component shown
in the display.
• When this option is enabled the buttons UP and DOWN light up.
• Only works when the system is in ON mode.
LIGHT
133
Turns on or turns off the spa light.
• The LIGHT button lights up when the spa light is turned on.
MANUAL / AUTOMATIC
134
• Turns the system from automatic to manual mode.
• When the system is in MANUAL mode the MANUAL/AUTOMATIC button lights up and
the REMOTE SPA buttons are inactive. The system can only be operated from the front
panel keyboard.
• MANUAL mode allows time and filtration cycle setting, temperature setting, pumps
manual activation and deactivation, filter backwashing, and units and massage setting.
• When the system is in Manual mode, if the heater or a filtration cycle are running they
stop until the system returns to automatic mode.
FILTRATION CYCLE TIMER
135
• Use this button to access the filtering cycle program menu.
22