Napoleon MIRAGE 730 Mode D'emploi page 22

22
10 x N570-0073 (1/4-20 X 3/8")
12. Assembling End Caps to Side Shelf
Peel protective coating from side shelf. Attach corresponding end cap as shown using (5) 1/4 – 20 x 3/8" screws.
Bend tabs on front of shelf up
with a flat head screw driver,
insert screw through tab and
into end cap.
www.napoleongrills.com
Tabs located on either side of ice bucket
must engage notches in side shelf.
3/8"(10mm)