Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cause
Temperature warning indicator (a) flashing; measurement
not possible
Measuring tool not within the tool
has operating temperature range
between +14 °F and 113 °F
( –10 °C and +45 °C)
Battery low indicator (b) appears
Battery voltage decreasing
(measurement still possible).
Battery low indicator (b) flashing; measurement not
possible
Battery voltage too low
All indicators on the display flash
The measuring tool is defective.
Maintenance and Service
!
WARNING
Do not immerse the measuring tool into water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
Maintain the reception lens 11 in particular, with the same
care as required for eye glasses or the lens of a camera.
If the measuring tool should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an authorized after-sales service center for
Bosch power tools. Do not open the measuring tool yourself.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the measuring tool.
Troubleshooting
Keep the measuring tool clean at all times.
-18-
Corrective Measure
Wait until the measuring
tool reaches the operating
temperature
Replace batteries
Replace batteries
Contact the Customer Service
Publicité
Table des Matières
